Portable drone countermeasures equipment

¥8,050.00

Portable drone countermeasures equipment

1.Product overview

Product Overview
The company independent research and development, production of drone countermeasures equipment. The equipment through the Ministry of Public Security police equipment inspection, service public security, troops, airports, schools examinations, and other regulatory no-fly zone on drone signal interference shielding. Maintain national security, public safety, flight safety and other security tasks. The device can target all satellite positioning signals for interference shielding, including: GPS1/ Beidou/ Glonass/ Galileo; can be commonly used for drones ISM 2.4G and ISM 5.8G band interference shielding, forcing the drone remote control, map transfer positioning, signal interruption, to achieve forced landing / return / hovering function, interference distance, open ground ≧ 1500 meters.

2.Technical parameters

Technical specifications
Product name Portable drone control equipment
Model number GT-GUN-02
Mainframe size 70cmx27cmx5.2cm
Weight 4.2kg
Qualification Reports National security alarm system product quality supervision and inspection test report

Ministry of Public Security Security Alarm System Product Quality Supervision and Inspection Test Report

 

Supported Bands

GPS positioning 1560 to 1620MHz
Remote control/graphic transmission 830MHz to 940MHz, (optional)

2400MHz to 2500MHz, 5725MHz to 5850MHz

 

 

Band configuration

 

3-band, 3-way

1.5G: 1560 to 1620MHz: 1 way

2.4G: 2400 to 2500MHz: 1 way

5.8G: 5725 to 5850MHz: 1 way

 

4-band, 4-way

900M: 830 to 940MHz: 1 way

1.5G: 1560 to 1620MHz: 1 way

2.4G: 2400 to 2500MHz: 1 way

5.8G: 5725 to 5850MHz: 1 way

Transmitting power 40W ~50W
Electricity supply Internal battery: 29V 7000mAH lithium battery

External back-up battery: 29V 10.5AH lithium battery (on request)

Continuity Continuous operation for more than 2 hours
Antennae Built-in
Heat dissipation methods Air-cooled
Interception methods Return to flight, hovering and landing, charting interference
Switch configuration 3
Control distance Greater than 1500m (open ground)

3.Product characteristics

1、Easy to operate

2、Color screen voltage and power display, can be connected to external battery design

3. Fully equipped with a 360 degree aluminium case for safety and protection, transport and preservation are guaranteed.

4、Safe and reliable products, tested by authoritative institutions

4.Instructions for use

Function Mode of operation
Start up To use the internal battery: Turn the power switch to the “internal” position to turn the power on.

To use an external battery backup: Connect the power cable and turn the power switch to the “external” position to turn the power on.

Return Interference with remote control and map signals.

Press the 2 switches on the “Return” sign at the same time; press the trigger and hold it, the corresponding switch will light up and the signal will start transmitting, targeting the drone

Forced landing Interference with navigation, remote control, and map signals.

Press the three switches on the “Return” and “Landing” signs at the same time and press the trigger, the corresponding switch will light up and the signal will start to be emitted to target the drone

Shutdown When you have finished using them, turn off the three switches to prevent the trigger from being pulled by mistake.

Switch off the battery voltage display, then switch the power switch to the “external” position and switch off the power

Charging Remove the waterproof dust plug from the charging cradle at the bottom of the battery compartment and insert the charger plug into the charging port with “charging”, the charger indicator lights up red, indicating charging is in progress; the indicator lights up green when charging is complete (or when the charger is not inserted).
Amount of electricity Check the battery voltage. Press the power button on the display to show the battery voltage instantly; recharge the battery when it falls below 22V.

5.Precautions

Serial number Cautions
1 When the UAV countermeasure equipment is working, do not stack other objects on it and dismantle the antenna to avoid affecting the shielding effect and damaging the machine
2 UAV countermeasures should be switched off promptly when not in use
3 It should be protected from water, dust and drops during use.
4 As the battery and antenna are used exclusively in conjunction with the main unit, and the factory commissioning is done one by one, please do not interchange them as far as possible to ensure the best results.
5 Please keep away from corrosive gases and liquids, and do a good job of dust and moisture control to avoid accelerating the ageing of the internal components of the equipment.
6 To check the battery voltage, press the power button on the display to instantly show the battery voltage; if the battery voltage falls below 22V, recharge it promptly.

6.Warranty, disclaimer

Serial number Cautions
1 One year warranty for non-human damage
2 Due to the special nature of radio frequency products, which are influenced by environmental factors, we only guarantee the relevant technical parameters of our products: frequency, frequency band, and

The power meets the requirements, the effectiveness of the tested sites, models. The effect of any other untested environment, model is not guaranteed.

3 When using radio equipment, please observe the relevant national and local laws and regulations; any violation of the relevant laws and regulations as a result is not the responsibility of the Company.
4 Product images are for reference only, please refer to the actual product. Different customers use different needs, configuration varies, product form

or labelling will vary accordingly.

レビュー

レビューはまだありません。

“Portable drone countermeasures equipment” の口コミを投稿します

メールアドレスが公開されることはありません。 が付いている欄は必須項目です

jaJapanese